66 lines
1.8 KiB
C++
66 lines
1.8 KiB
C++
/*
|
|
SD card file dump
|
|
|
|
This example shows how to read a file from the SD card using the
|
|
SD library and send it over the serial port.
|
|
Pin numbers reflect the default SPI pins for Uno and Nano models.
|
|
|
|
The circuit:
|
|
SD card attached to SPI bus as follows:
|
|
** SDO - pin 11
|
|
** SDI - pin 12
|
|
** CLK - pin 13
|
|
** CS - depends on your SD card shield or module.
|
|
Pin 10 used here for consistency with other Arduino examples
|
|
(for MKR Zero SD: SDCARD_SS_PIN)
|
|
|
|
created 22 December 2010
|
|
by Limor Fried
|
|
modified 9 Apr 2012
|
|
by Tom Igoe
|
|
|
|
This example code is in the public domain.
|
|
*/
|
|
#include <SD.h>
|
|
|
|
const int chipSelect = 10;
|
|
|
|
void setup() {
|
|
// Open serial communications and wait for port to open:
|
|
Serial.begin(9600);
|
|
// wait for Serial Monitor to connect. Needed for native USB port boards only:
|
|
while (!Serial);
|
|
|
|
Serial.print("Initializing SD card...");
|
|
|
|
if (!SD.begin(chipSelect)) {
|
|
Serial.println("initialization failed. Things to check:");
|
|
Serial.println("1. is a card inserted?");
|
|
Serial.println("2. is your wiring correct?");
|
|
Serial.println("3. did you change the chipSelect pin to match your shield or module?");
|
|
Serial.println("Note: press reset button on the board and reopen this Serial Monitor after fixing your issue!");
|
|
while (true);
|
|
}
|
|
|
|
Serial.println("initialization done.");
|
|
|
|
// open the file. note that only one file can be open at a time,
|
|
// so you have to close this one before opening another.
|
|
File dataFile = SD.open("datalog.txt");
|
|
|
|
// if the file is available, write to it:
|
|
if (dataFile) {
|
|
while (dataFile.available()) {
|
|
Serial.write(dataFile.read());
|
|
}
|
|
dataFile.close();
|
|
}
|
|
// if the file isn't open, pop up an error:
|
|
else {
|
|
Serial.println("error opening datalog.txt");
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
}
|